您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE AMS5966 Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI, Consu

作者:标准资料网 时间:2024-05-16 22:26:01  浏览:8907   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AMS5966
Title:Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI, Consumable Electrode or Vacuum Induction Melted
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant nickel alloy in the form of welding wire.
下载地址: 点击此处下载
Product Code:SAE J1460/2
Title:Human Mechanical Impact Response Characteristics - Response of the Human Neck to Inertial Loading by the Head for Automotive Seated Postures (STABILIZED Feb 2011)
Issuing Committee:Human Biomechanics And Simulations Standards Steering Cmte
Scope:This series of reports provides response characteristics of the head, face, neck, shoulder, thorax, lumbar spine, abdomen, pelvis, and lower extremities. In each report, the decriptions of human impact respnse are based on data judged by the subcommittee to provide the most appropriate information for the development of human surrogates.
基本信息
标准名称:碳酸铈
英文名称:Cerium carbonate
中标分类: 冶金 >> 有色金属及其合金产品 >> 稀有金属及其合金
ICS分类: 冶金 >> 有色金属 >> 其他有色金属及其合金
替代情况:替代GB/T 16661-1996
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-03-31
实施日期:2008-09-01
首发日期:1996-12-19
作废日期:
主管部门:国家发展和改革委员会
提出单位:国家发展和改革委员会稀土办公室
归口单位:全国稀土标准化技术委员会
起草单位:江西金世纪新材料股份有限公司
起草人:饶勇、袁萍、金燕华、俞志春
出版社:中国标准出版社
出版日期:2008-06-01
页数:5页
计划单号:20062197-T-303
书号:155066·1-31698
适用范围

本标准规定了碳酸铈的要求、试验方法、检验规则与标志、包装、运输、贮存等。本标准适用于化学法制得的碳酸铈,主要供汽车尾气净化催化剂、工程塑料颜料、玻璃等用。 本标准是对GB/T16661—1996《碳酸铈》的修订。本标准与GB/T16661—1996《碳酸铈》相比,主要变化如下:
———按GB/T17803—1999《稀土产品牌号表示方法》的要求采用数字牌号表示方法;
———增加了023230A 产品牌号;
———各牌号对稀土总量(REO)、部分稀土杂质和非稀土杂质CaO 的考核指标进行了调整;
———各牌号对非稀土杂质的氯根及硫酸根含量分别进行了考核;
———各牌号增加了对非稀土杂质锌的考核指标。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T8170 数值修约规则
GB/T12690(所有部分) 稀土金属及其氧化物中非稀土杂质化学分析方法
GB/T16484.19 氯化稀土、碳酸稀土化学分析方法 氧化稀土总量的测定
GB/T18115.2 稀土金属及其氧化物中稀土杂质化学分析方法 铈中镧、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定

所属分类: 冶金 有色金属及其合金产品 稀有金属及其合金 冶金 有色金属 其他有色金属及其合金